What Do the LED Lights and Colors Mean On My Nomad Omega or Omen?

WHITE:

White (Fast Blinking) = Firmware is updating (FOTA). Shows only white firmware is being installed or before FOTA reboot for 1-2 seconds.

White (Slow Blinking) = System is booting. Shows until device is ready to show signal status.

White (Solid) = Passing signal. Shows after device is ready if the device is passing signal.

White (50% Bright) = Setup complete. Lower the brightness after 5 minutes of passing signal.

RED:

Red (Hard Blinking) = No SIM card

Red (Soft Blinking) = Firmware Error. Device has fatal error.

GREEN:

Green (Solid Green) = WiFi disabled by user. If user disables WiFi through settings, but device is still passing signal.

YELLOW:

Yellow (Fast Blinking) = Factory reset. Shows after pressing hard-rest button until device restarts.

BLUE:

Blue (Hard Blinking) = WPS Pairing. Shows for 2-minutes after WPS button is pressed or until pairing is completed.

Updated on: 09/27/2025